RESUMEN
The development of stealth devices that are compatible with both infrared (IR) and radar systems remains a significant challenge, as the material properties required for effective IR and radar stealth are often contradictory. In this work, based on an IR electrochromic device (IR-ECD), concepts of metamaterial manipulating electromagnetic waves are applied to develop a multifunctional ultrathin metasurface with a low radar cross section (RCS) and variable infrared emissivity. This paper presents a linear-to-linear polarization conversion metasurface (PCM) designed by hollowing the IR-ECD. In this way, the IR-ECD based on polyaniline (PANI) can also modulate the reflection waves in the microwave band without affecting its features in the infrared region. Thus, the proposed metasurface integrates both microwave stealth and variable infrared emissivity through a single layer. The measured results show that a 10 dB RCS reduction is achieved in the band of 8.46-9.5 GHz, and the infrared emissivity can be adjusted from 0.870 to 0.513 in the infrared stealth band of 8-14 µm. Due to the ultrathin thickness (only 0.081λ0 at 9 GHz), low RCS in the X-band, and variable infrared emissivity, the designed multifunctional stealth metasurface has promising applications on military platforms with various surrounding environments.
RESUMEN
The application of flexible indium tin oxide (ITO-free) electrochromic devices has steadily attracted widespread attention in wearable devices. Recently, silver nanowire/poly(dimethylsiloxane) (AgNW/PDMS)-based stretchable conductive films have raised great interest as ITO-free substrate for flexible electrochromic devices. However, it is still difficult to achieve high transparency with low resistance due to the weak binding force between AgNW and PDMS with low surface energy because of the possibility of detaching and sliding occurring at the interface. Herein, we propose a method to pattern the pre-cured PDMS (PT-PDMS) by stainless steel film as a template through constructed micron grooves and embedded structure, to prepare a stretchable AgNW/PT-PDMS electrode with high transparency and high conductivity. The stretchable AgNW/PT-PDMS electrode can be stretched (5000 cycles), twisted, and surface friction (3M tape for 500 cycles) without significant loss of conductivity (ΔR/R ≈ 16% and 27%). In addition, with the increase of stretch (stretching to 10-80%), the AgNW/PT-PDMS electrode transmittance increased, and the conductivity increased at first and then decreased. It is possible that the AgNWs in the micron grooves are spread during PDMS stretching, resulting in a larger spreading area and higher transmittance of the AgNWs film; at the same time, the nanowires between the grooves come into contact, thus increasing conductivity. An electrochromic electrode constructed with the stretchable AgNW/PT-PDMS exhibited excellent electrochromic behavior (transmittance contrast from ~61% to ~57%) even after 10,000 bending cycles or 500 stretching cycles, indicating high stability and mechanical robustness. Notably, this method of preparing transparent stretch electrodes based on patterned PDMS provides a promising solution for developing electronic devices with unique structures and high performance.
RESUMEN
A high-level infrared dynamic patterned encoder (IR-DPE) possesses prospective applications for energy-harvesting and information, but a simple and reliable method for fabrication remains challenging. Herein, we first report an IR-DPE with multiple thermal radiation characteristics based on polyaniline (PANI). Specifically, the electron-beam evaporation technique is introduced to obtain the divanadium pentoxide (V2O5) coating, and then the V2O5 film acts as an oxidant to drive in situ polymerization of the PANI film. During the process, we experimentally explore the relationship between the thickness of V2O5 and the emissivity of PANI to obtain up to six emissivity levels and achieve the IR pattern integrated into multiple thermal radiation characteristics. The device shows multiple thermal radiation characteristics at the oxidized state, realizing a pattern visible with the IR camera and the same thermal radiation properties at the reduced state, leading to the pattern concealed in the IR regime. In addition, the highest emissivity tunability of the device is to be tuned from 0.40 to 0.82 (Δε = 0.42) at 2.5-25 µm. Meanwhile, the device exhibits a maximum temperature control of up to 5.9 °C. The results show the enormous potential of IR-DPEs for IR information transfer and thermal management.
RESUMEN
A multifunctional electronic skin with thermal radiation regulation and electromagnetic interference (EMI) shielding is urgent for electronic systems because of the thermal radiation emission and electromagnetic wave pollution. Herein, a flexible electronic skin was designed and fabricated, where the polyaniline (PANI) served as the functional layer and Ti3C2Tx MXene was employed as the conductive electrode. The transformation of emeraldine salt (ES) and leucoemeraldine base (LB) of PANI makes the skin achieve an infrared emissivity modulation, and the electromagnetic loss of PANI and ultrahigh electrical conductivity of Ti3C2Tx MXene make it exhibit EMI shielding ability. Benefiting from the special structural design, the multifunctional skin with a small thickness (0.3 mm) and low surface density (0.06 g/cm2) exhibits an excellent infrared emissivity modulation ability (Δε) of 0.32 with emissive power of 119.1 W/m2 at the wavelength range of 2.5-25 µm and total shielding effectiveness (SET) of 36.3 dB over the X-band (8.2-12.4 GHz). Meanwhile, the multifunctional skin remains black in the visible spectrum but a changeable color in the infrared spectrum. Even after repeated bending and twisting, the multifunctional skin still maintains a good emissivity adjustment. The simultaneous realization of dynamic thermal radiation regulation and EMI shielding endows the skin promising potential for various fields, such as adaptive infrared camouflage, thermal regulation, anticounterfeiting, and EMI shielding-related crossing field.
